JT‑101: Introduction to Joint MTN Operations (Link‑16, US Members, FOUO) (20 Hrs) Practice Test

These questions are part of the practice quiz. Start practicing

• What is one of the outputs of the Network Planning step in the Network Management System?
• Which of the following MIDS LVTs can transmit at 1000 watts and is also known as MIDS-on-Ship (MOS)?
• How many pulses does the component that provides timeslot specific information consist of?
• Which Link 16 jam resistance characteristic defines the power output needed to jam Link 16 communications?
• What is the purpose of a Link 16 terminal's Secure Data Unit (SDU)?
• What additional component consists of jitter in a SADL TDMA timeslot?
• Which of the following matches JREAP B to its correct encryption devices?
• What is true of Link 16 spread spectrum processing?
• Are NATO Link 1 Track Numbers limited in the number of combinations available for use?
• Which type of JREAP uses UHF SATCOM as an exchange medium?
• What measurement is used to express the pulse density of all Link 16 transmissions in a 12 second frame?
• What is the purpose of a Command Message in Link 16 communications?
• Which of the following platforms are JTIDS/MIDS capable? Select all that apply.
• What is the primary function of a data loop in joint military operations?
• Which aspect of Link 16 relies on time slots for efficient data exchange?
• Which of the following is NOT a consideration in the selection of a Link 16 network design?
• What is the basic recurring unit of time in Link 16 communications?
• What factors should be considered when selecting a crypto key for a network?
• Which of the following is a characteristic of a JTIDS/MIDS pulse?
• If the terminal mode switch is turned off, which parameters are retained for no less than 48 hours?
• Which statement is true regarding track assignment?
• Which JTIDS/MIDS access technique is not operator selectable and allows different users in various NPGs to communicate?
• What type of data does a Link 16 terminal primarily communicate?
• Which of the following IS NOT a Built-in Test (BIT) provided by Link 16 terminals?
• Which units are responsible for maintaining Link 16 network functions?
• How many of the 31 symbols transmitted for each JWORD must be received to pass uncorrupted data?
• Which source document is used to determine foreign JTIDS/MIDS EMC restrictions?
• Which of the following best describes the role of the Positional Reference (PR) in network operations?
• Which of the following correctly characterizes Link 16's method of data transmission?
• Which requirement is listed under the Link 16 OPTASK LINK for operational capability?
• What is the essential requirement for platforms using Unconditional Relay?
• How many types of access modes are primarily recognized in JTIDS/MIDS?
• Which of the following are components of a timeslot in Link 16 communications?
• Which message type cannot be implemented using JREAP?
• Which component contains the majority of information in a Link 16 timeslot?
• Which JREAP type matches with a transmission rate of 2400 BPS during normal operational use?
• Which frequency ranges are associated with NATO Link 22?
• What characteristic of Link 16 ensures communication remains secure against jamming?
• Which process allows a JTIDS/MIDS Unit (JU) to compare local data to tracks received from an IU?
• What is the most commonly used exchange medium for Link 11B?
• A link margin value of 21dB will force an enemy jammer within how many miles of a receiving terminal if the transmitting terminal is 60 miles away?
• What is the correct mapping of JREAP A to its communication protocol?
• Which M-Series message reports the position, track number, identity, and track quality of surface tracks?
• What is an essential requirement for establishing a reliable Link 16 communication network?
• What type of encryption devices are used with JREAP A?
• What is necessary for a Link 16 terminal to obtain coarse synchronization?
• Why is the JTIDS/MIDS Spectrum Users Guide (JSUG) important?
• Which JTIDS/MIDS access mode allows multiple participants to share common timeslots using the same net?
• Which JTIDS/MIDS access mode permits only one unit to transmit per timeslot?
• Dedicated Timeslot Reuse is a form of which access mode?
• How many categories do all M-Series messages fall into?
• What does SADL stand for?
• Which mode assigns a discrete Crypto Variable Logic Label (CVLL) for message encryption?
• What is the range for high Link 22 Track Numbers?
• What is necessary to ensure the maintenance of Link 16 network operations?
• To prevent interference, what is present within the JTIDS/MIDS frequency band?
• Which of the following refers to the measure of how effectively a communication system operates amid potential jeopardy from jamming?
• Which of the following is essential for maintaining a consistent tactical picture?
• Which of the following statements about a JTIDS/MIDS pulse stream is true?
• What are the basic characteristics of Link 11? Select all that apply.
• What is a key characteristic of the Network Time Reference (NTR)?
• Which of the following are characteristics of a timeslot in Link 16 communications?
• What defines a data loop in the context of joint operations?
• What is the legal Link 16 surveillance track number value range?
• What function does the Platform J connection NOT provide?
• How does a Link 16 terminal passively obtain fine synchronization?
• Which function is not typically included in the Link 16 maintenance tasks?
• What does the term 'hopping rate' refer to in Link 16 communications?
• Which statement about JTIDS/MIDS transmissions is accurate?
• Which statement about PPLIs is correct?
• Which of the following advantages is associated with Indirect (Relay) connectivity?
• Which of the following is a required action for maintaining Link 16 network operations?
• What is a Crypto Variable Logic Label (CVLL)?
• Each JTIDS/MIDS transmission contains a ____________ pulse stream.
• Which technique enables timeslot allocation across multiple nets?
• Which of the following is a characteristic of the MIDS LVT family of Link 16 terminals?
• In a mutual tracking plan, track-producing units are required to:
• Which of the following is NOT an exchange medium for Link 11B?
• What type of filter allows an IU to filter data based on geographic location of that data?
• What is one of the uses of the OPTASK LINK message after network operations have been established?
• What TDL can the A-10C operate?
• What best describes the Black Traffic Encryption Key (BTEK) used for Network Enabled Weapons?
• Which of the following statements about a network design with the name USFU0019B is true?
• Which of the following is true of the use of the Link 16 information assurance feature known as double pulse transmissions?
• How does the U.S. Navy identify network designs?
• What does successful network operation in Link 16 rely on?
• What is NOT a function of the Link 16 terminal's Platform J connection?
• How do Link 11 and Link 11B primarily differ?
• Prior to transmitting surveillance tracks, which of the following must units do?
• What is the primary use of the TSEC in Link 16 operations?
• Which message type is used to resolve air and surface track dual designations?
• Which units are responsible for producing and transmitting surveillance tracks?
• During a SADL transmission, how many hops per time slot occur?
• Link 16 jam resistance is defined in which two ways?
• In which mode is net 127 specified in the Network Description Document (NDD)?
• What set of protocols is used to exchange J-Series messages with non-JTIDS/MIDS equipment?
• Which type of JREAP provides a Full Duplex Synchronous or Asynchronous Point-to-Point protocol?
• Which JREAP type allows for secure transmission over non-secure networks?
• Which of the following is essential for Link 11 communications?
• In the context of Link 16 operations, what does "low probability of intercept" mean?
• What is the preferred method to handle pending tracks before full correlation is confirmed?
• What is the main advantage of using Link 16 for military communications?
• In the naming convention for NDD USFU0020A, what does the 'A' represent?
• What is the range of legal Track Qualities (TQs) for Link 11/11B compared to Link 16?
• What type of designation occurs when the same target is reported by two units simultaneously?
• What is required for a Link 16 terminal to actively obtain fine synchronization?
• What is the data throughput rate of Link 11 when set to fast data rate?
• When a platform is ready to enter the MTA, what must it avoid doing without prior coordination?
• Which access mode assigns surveillance capacity based on platform need?
• What OPTASK LINK set identifies the U.S. Navy network design identifying information?
• JREAP C requires which of the following for its data transmission?
• What are the two types of Link 16 networks?
• Which of the following accurately describes Time Division Multiple Access (TDMA)?
• What does the term Geodetic Registration refer to in the context of data registration?
• To operate on the Link 16 network, what is required for all equipped systems?
• What communication component is specifically associated with Link 16?
• What does the CJCSI Link 16 Spectrum Deconfliction ensure about JTIDS/MIDS transmissions?
• Which statement about the External Time Reference Network (ETRN) is NOT true?
• A circumstance where the same track or point is reported using multiple TNs is known as what?
• What type of BIT is conducted any time the terminal is switched from OFF or STBY to the ON state?
• What is the primary goal of the Network Initialization step in the Network Management System?
• What condition relates to the correct relative alignment of local and remote track positional data?
• What are the purposes of the Network Operations step in the Network Management System?
• What is the maximum data rate of JREAP C during standard operations?
• What is the standard encryption mode for the KG-40A?
• What version of JREAP uses SIPRNet, JTEN, or a KG-175 TACLANE over non-secure networks as a means of encryption?
• Which JTIDS/MIDS access mode provides specific transmit timeslots to units?
• Which component pseudo-randomly assigns a center frequency to each pulse?
• What is the link margin value required to compel an enemy jammer at equal distance to a receiving Link 16 terminal to utilize 128 times more power than the transmitting terminal?
• Which type of relay requires at least one platform to be assigned relay timeslots?
• Which of the following categorizes a message transmitted by stationary land platforms?
• Which of the following describes the data registration process known as Sensor Registration?
• Where in the Network Description Document (NDD) can a platform operator reference to identify Crypto Variable Logic Label (CVLL) usage for their platform?
• Each M-Series message contains how many bits of tactical information?
• Which Network Participation Group (NPG) is responsible for supporting the reporting of PPLI and system status messages?
• True or False: All Data Terminal Sets are interoperable with each other.
• What is a critical aspect of maintaining the Link 16 network?
• What protocol does JREAP C utilize for data transmission?
• Which of the following is a primary function of Link 16?
• What is essential for Data Registration to occur correctly?
• Which message types can be implemented using JREAP?
• What term describes a group of participants or terminals in synchronization sharing a common understanding of timeslot boundaries?
• In track reporting, what is the significance of the term 'Reporting Responsibility'?
• How does indirect connectivity improve connectivity?
• Which of the following statements about Link 11B is true?
• What does SCC stand for in the context of Link 11?
• What does 'Track by Exception' refer to in tracking production?
• In a SADL Network, what does a net shape of 2-4 indicate?
• A ____________ uses PPLI receptions to maintain and improve synchronization.
• Which of the following is NOT a step in the MTN planning process?
• How many timeslots are in a frame in Link 16 communications?
• Which of the following IS NOT true about the Link 16 information assurance feature known as double pulse transmissions?
• What requirements must all participants meet to initialize a single, synchronized network?
• Which network function does the Link 16 Manager perform?
• Which of the following is NOT a Built In Test (BIT) provided by Link 16 terminals?
• What best describes Link 22?
• Which system provides the reference point where platforms will report their surveillance track data?
• How does the Operational BIT function in Link 16 terminals?
• Which of the following is NOT a Data Terminal Set (DTS) used for Link 11 operations?
• What do you call a common set of time and frequency resources shared among SADL network participants?
• How many JTIDS/MIDS net numbers exist?
• Which of the following are considered inputs of the Network Initialization step in the Network Management System?
• What is another term for the hopping pattern used by a terminal for a single transmission?
• Each frame in Link 16 communication has a duration of what length?
• What is the main purpose of NATO Link 1?
• How many nets can operate in a Link 16 network before reaching maximum spectral capacity?
• Which JREAP type is dependent on available IP network bandwidth for its operation?
• What type of BIT detects a degradation in terminal performance while the terminal is powered on?
• Which of the following is NOT a function of Link 16 terminals?
• Which type of SADL network enables SADL-equipped platforms to exchange tactical information with Link 16 participants?
• What does the time allowed for a transmission to travel to potential receivers determine?
• What is necessary for successful operation of a JTIDS/MIDS system?
• Which statement about Link 22 operational capabilities is true?
• Which factors are considered in selecting a Link 16 network design?
• What component of a Link 16 timeslot contributes to jam resistance through a variable wait time before data pulses are transmitted?
• Which aspect does 'Track Quality' refer to?
• What are the two types of Link 16 capacity?
• Which of the following are disadvantages of Indirect (Relay) connectivity?
• What is defined as the physical location of a platform in Link 11?
• How does a unit detect a target in another unit's Track Production Area?
• Match the JREAP type with the relevant OPTASK LINK set: LNKSAT/SATELLITE LINK 16 SEGMENT.
• How are TNs typically assigned during track operations?
• Which statement is NOT true about CJCSI 6232.01 Link 16 Spectrum Deconfliction?
• Which message type in Link 11 provides identity and track quality information?
• Which factor does NOT contribute to the selection of a crypto key for a network?
• Where can the network time base for a Link 16 network be determined?
• Which Link 11 waveform is accessible to all Link 11 capable platforms?
• What is the basic duration of each timeslot in Link 16 communications?
• Which of the following is NOT a type of device used in JREAP operations?
• What characteristic defines the required distance between a jammer and a receiver to jam Link 16 communications using equal power?
• Where will the operator find the Initialization Data Load (IDL) file assignment for their platform?
• Link 16 line-of-sight connectivity is limited by which type of signal propagation?
• What is one of the roles of the Link 16 Manager?
• What is a significant aspect of the MTN tactical picture?
• Which message standards are employed by SADL?
• Which version of JREAP necessitates the assignment of client and server roles?
• How many frames are in an epoch in Link 16 communications?
• Which data terminal is specifically mentioned as a DTS for Link 11?
• What represents the horizontal positional reliability within a 95 percent confidence level, serving to inform operators of track accuracy?
• Which JTIDS/MIDS protocol allows platforms to take turns transmitting and receiving data?
• Which statement about the SDU used by the MIDS LVTs is true?
• What is the requirement for the IU with the best positional data on a track?
• What are the three requirements for Link 16 direct connectivity?
• Under which MIDS terminal mode are all the IPF features disabled?
• Which types of tracks cannot be manually correlated?
• What document must the JICO refer to for instructions regarding operational network entry and exit?
• Which entity is responsible for assigning TNs for C2IUs?
• Which method is NOT typically used to deconflict Link 16 networks?
• What is the responsibility of the JTDC to the Joint Interface Control Officer (JICO)?
• How does Link 16 overcome line-of-sight limitations of JTIDS/MIDS?
• What is the primary purpose of the Transmission Security (TSEC) variable in Link 16?
• What are the basic characteristics of NATO Link 1?
• What characteristic represents the number of frames occurring in an epoch in Link 16 communications?
• What is the significance of the number between 1 and 127 in Link 16?
• In Link 16 networks, what is a primary function of the Time Slot Duty Factor (TSDF)?
• Which statement is true regarding RELGRID operations?
• Which of the following is a characteristic of Link 16 communications?
• Which BIT operates continuously while the terminal is powered on?
• What characterizes a Stacked Net in Link 16?
• Which statement is true regarding Link 11B’s characteristics?
• What net number range is required for a specific access mode in JTIDS/MIDS?
• What is the purpose of the Unit Position (UPOS) in Link 11 operations?
• What is the purpose of NPG 18 within the JTIDS network?
• Which step in the Network Management System is focused on resolving network degradations and failures?
• Which duties are associated with the Link 11/11B Manager? Select all that apply.
• What are the two types of JTIDS/MIDS RF connectivity?
• What exists when the same track number is used by multiple units for different tracks?
• What capability does JREAP B offer related to transmission rates?
• What role does a Primary User (PRU) play in maintaining synchronization?
• What is the role of the Link 16 network in military operations?
• Which of the following characterizes successful Link 16 communications?
• What procedure is essential for deconflicting networks as per the Link 16 guidelines?
• What portion of the electromagnetic spectrum do Link 16 terminals operate?
• According to CJCSI 6232.01, what is required for Link 16 spectrum deconfliction?
• Which of the following is NOT a terminal interrupt in a Link 16 system?
• Which of the following IS NOT true about Link 16 spread spectrum processing?
• Are Link 22 Track Numbers compatible with Link 16?
• What is the typical operating mode of NATO Link 1?
• What frequency band does Link 11 operate on?
• Which of the following IS NOT true about a JTIDS/MIDS pulse stream?
• What type of network does JREAP A primarily operate over?
• How many cryptographic keys can the JTIDS/MIDS Secure Data Unit (SDU) store?
• Which component of Link 16 assists in managing the link's operational security?
• Which statement is accurate regarding Link 16 on-demand data scheduling?
• In which Link 16 security mode is the CVLL only assigned to TSEC?
• Which two methods are effective for Link 16 network deconfliction?
• What JTIDS/MIDS net numbers are used to differentiate frequency-hopping patterns?
• What is the maximum number of storage locations in the Secure Data Unit (SDU)?
• Which data link exchanges M-Series messages using a full duplex point-to-point connection?
• Link 11 operates in which mode?
• Which description fits the definition of a 'Track Production Area' (TPA)?
• Which statement is true regarding an NTRE in an External Time Reference Network (ETRN)?
• Which of the following OPTASK LINK sets are part of the LNKXVI (Link 16 Segment)?
• Which NPG is utilized for exchanging Electronic Warfare parametric data?
• What is crucial for the initialization of network time reference in Link 16?
• What is a value associated with the actions of Subscriber functions in Link 16 operations?
• What is one of the purposes of the Network Time Reference (NTR)?
• Are NATO Link 1 Track Numbers (NTNs) directly interoperable with Link 11/11B and Link 16?
• If a track number (TN) is in use, what should operators be prohibited from doing?
• Which method is NOT utilized to achieve a multi-net?
• Which type of Link 16 network is based off GPS time corrected to UTC?
• Which component is NOT linked directly to encryption in Link 16?
• What technique allows a common group of timeslots to be used on different operating selectable nets?
• Which OPTASK LINK set specifies the crypto needed for Network Enabled Weapons (NEW)?
• Which of the following OPTASK LINK sets is NOT part of the LNKXVI (Link 16 Segment)?
• When two tracks are correlated, they are known as what?
• What includes actions required to maintain Link 16 network operations besides maintenance?
• What does ETRN stand for in the context of network synchronization?
• What is the primary function of a geographic filter in data management?
• In the Link 11 Segment of the OPTASK LINK, what set identifies the origin point for Link 11 operations?
• Which of the following techniques is not an access method in JTIDS/MIDS?
• Which access mode in JTIDS/MIDS can be machine-controlled?